Description
Concrete pot made of architectural concrete DBA012
Color
The products are manufactured as standard in 4 staining:
bleached - a product based on white cement and selected quartz sand.
Gray (natural) - a product made on a concrete mix without the addition of pigment, what gives
the color of a light natural concrete mix
light anthracite - with a minimal addition of black pigment, which gives the product a bit darker than the natural one and with a more pronounced gray feel
anthracite – product containing the highest amounts of black pigment admixture, which gives the strongest color in our collection. This color is characterized by a rich play of shades and tones in the given range.
dimensions:
30 x 15 x 15 h
Weight: ok. 10 kg
All elements are made to individual dimensions. The final dimensions may differ from the requested tolerances +-7 mm / length, width / at axis length to 2 metry, and +/- 1 cm with the axle length above 2 meters. Depending on the technology used, various possible material thickness parameters are envisaged, and thickness tolerances. In each case, the manufacturer produces elements for the design guidelines. Please note, that the face side of the product meets the smoothness requirements, and the technological side of the product may vary significantly and require additional finishing and processing, on the construction site, or requires a separate, express order. The technological side of the material is not subject to aesthetic assessment, in terms of colors, surface finish and smoothness. Leaving the technological side without additional processing and finishing is not a product defect.
Natural ingredients are used in the production of the elements, characterized by high color variability, just like individual elements of production series and it is a natural symptom for the material and is its desired feature, consciously not corrected by the manufacturer. Any smudges, discoloration, streaks, efflorescence is an aesthetic and natural element, uncontrolled in the production process, building the nature of the material. All material samples and photos showing the material are only illustrative material and the final product may be different from them. The purchase is tantamount to the acceptance of color discrepancies in the given range, in one production batch, in one order. It should also be noted, that on a small scale it is possible to go beyond the given scale, which should be accepted as the result of natural processes of creating and drying the material.
Due to the basic properties of architectural concrete, obtaining exactly the same number of pits is impossible, this is the characteristic of this material, but it is this element that is its greatest advantage, thanks to this, each product is original.
